Edge-lighting Form Round & Square MR16 Manuel d'utilisateur télécharger pdf

SAVE THESE INSTRUCTIONS!

M-FOR-_

Form Round & Square

Installation Instructions for

904-FJ-FORM-02

IMPORTANT INFORMATION

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Use this fixture indoors only.

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never cover the halogen lamp with anything other than a

lamp shield provided by Edge Lighting and never place

flammable material close to the fixture.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

- Do not touch lamp at anytime. Use a soft cloth instead as oil

from skin may damage lamp.

- It is normal for a new halogen lamp to produce minor

smoke when first turned on.

- Do not operate the luminaire with a missing or damaged

shield.

- Turn power off and allow to cool before replacing lamp.

1: Use a small Allen wrench or a pen point to loosen and

remove the lens holder ring from the fixture ring.

CAUTION: To reduce risk of a burn or electrical shock during

lamping, disconnect the power to the fixture.

Use MAX 75 Watt, Type MR16 Front Glass Cover Halogen

Lamp.

Install the Lamp

ALLEN WRENCH

LENS HOLDER RING

FIXTURE RING

2: Place a lens or louver and the lamp into the fixture ring.

Replace and tighten the lens holder ring to fixture ring.

3: Align and push socket holes completely onto lamp pins.

LENS OR LOUVER

LAMP

LENS HOLDER RING

SOCKET

LAMP

PINs

M2-FOR-_

FJ-FOR-_

- This product is ETL listed for indoor dry locations.

- This product is not restricted to certain height installation.

It is approved to be used at any height above the floor.

- Applicable accessories are Hexcell Louver, Glass Lenses &

MR16 Snout.

FIXTURE RING

1 2

Résumé du contenu

Page 1 - Form Round & Square

SAVE THESE INSTRUCTIONS!M-FOR-_Form Round & SquareInstallation Instructions for1904-FJ-FORM-02IMPORTANT INFORMATION1718 W. Fullerton AveChicago, I

Page 2 - CIRCUIT #1 CIRCUIT #2

2Install the Fixture to Monorail Connector (MC-FJ-_)1: Place the Fast Jack housing onto the Monorail and use fingers to tighten the Fast Jack hous

Commentaires sur ces manuels

Pas de commentaire

Edge-lighting Form Round & Square MR16 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Edge-lighting Form Round & Square MR16. Edge Lighting Form Round & Square MR16 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Edge-lighting Form Round & Square MR16