Edge-lighting Low Rider Manuel d'utilisateur télécharger pdf

SAVE THESE INSTRUCTIONS!

M-LOW-_

FJ-LOW-_

M2-LOW-_

Low Rider

Installation Instructions for

904-LOW-02

IMPORTANT INFORMATION

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Use this fixture indoors only.

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never cover the halogen lamp with anything other than a

lamp shield provided by Edge Lighting and never place

flammable material close to the fixture.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

- Do not touch lamp at anytime. Use a soft cloth instead as oil

from skin may damage lamp.

- It is normal for a new halogen lamp to produce minor

smoke when first turned on.

- Do not operate the luminaire with a missing or damaged

shield.

- Turn power off and allow to cool before replacing lamp.

IMPORTANT SAFETY INSTRUCTIONS

Install the Lamp & Accessory Shade (S3-_)

1: Unscrew and remove the cap from the accessory shade base

(this only applies for Little Shady round back glass shade

accessory).

ACCESSORY SHADE BASE

CAP

Use MAX 50 Watt, Type MR16 Front Glass Cover Halogen

Lamp.

CAUTION: To reduce risk of a burn or electrical shock during

lamping, disconnect the power to the fixture.

2: Place the MR16 lamp into the accessory shade.

MR16 LAMP

ACCESSORY SHADE

- This product is ETL listed for indoor dry locations.

- This product is not restricted to certain height installation.

It is approved to be used at any height above the floor.

- Applicable accessories are Hexcell Louver, Glass Lenses,

Little Shady Mesh Back Shade, Little Shady Round Back

Solid Shade, Little Shady Round Back Glass Shade, Large

Solid Back Shade.

1 2 3

Low Rider 1
CIRCUIT #1 CIRCUIT #2 3

Résumé du contenu

Page 1 - Low Rider

SAVE THESE INSTRUCTIONS!M-LOW-_FJ-LOW-_M2-LOW-_Low RiderInstallation Instructions for1904-LOW-02IMPORTANT INFORMATION1718 W. Fullerton AveChicago, IL

Page 2

2CMR16 LAMPACCESSORY SHADE3: Line up the MR16 lamp pins with the socket holes.4: Push the lamp pins completely into the socket holes and simultane

Page 3 - CIRCUIT #1 CIRCUIT #2

3Install the Fixture to Monorail Connector (MC-FJ-_)1: Place the Fast Jack housing onto the Monorail and use fingers to tighten the Fast Jack hous

Commentaires sur ces manuels

Pas de commentaire

Edge-lighting Low Rider Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Edge-lighting Low Rider. Edge Lighting Low Rider User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Edge-lighting Low Rider