Edge-lighting Grazie Manuel d'utilisateur télécharger pdf

SAVE THESE INSTRUCTIONS!

- This product is suitable for indoor locations.

- This product can mount to either a 4" square electrical box

with round plaster ring or an octagon electrical box.

- This product is dimmable with a standard incandescent

dimmer.

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Install Fixture

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Turn power to junction box OFF before beginning any

electrical work.

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

CANOPY

1: Determine the desired fixture height (H), from the bottom of

the glass ornaments to the top of the canopy.

Installation Instructions for Grazie Suspension

904-GRAZIE-01

GRAZIE-S-__-__

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

2: Slide the canopy up and down by pushing the tab on the

aircraft cable grip until desired height is achieved. Release

the tab to lock the aircraft cable in place.

3: Loosen the M4 set screws on both sides of the strain

relief with the 2mm Allen wrench.

4: Pull the end of the aircraft cable out of one strain relief hole.

Slide the strain relief down the aircraft cable behind the cable

grip.

CLEAR CORD

CORD GRIP

CANOPY

AIRCRAFT CABLE

STRAIN

RELIEF

SET

SCREW

AIRCRAFT

CABLE

CABLE GRIP

CABLE

GRIP

GLASS

ORNAMENT

SOCKET HOUSING

1 2 3

Résumé du contenu

Page 1 - Grazie Suspension

SAVE THESE INSTRUCTIONS!- This product is suitable for indoor locations.- This product can mount to either a 4" square electrical box with roun

Page 2 - AIRCRAFT CABLE

5: Loop the end of the aircraft cable into the other strain relief hole and tighten the two M4 set screws with the 2mm Allen wrench.6: Trim of

Page 3 - Ornaments

GCANOPYTHREADED STUDTHUMB NUTS16: Place all wires and wire nut connections inside the canopy.17: Align and slide the canopy holes onto the threaded st

Commentaires sur ces manuels

Pas de commentaire

Edge-lighting Grazie Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Edge-lighting Grazie. Edge Lighting Grazie User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Edge-lighting Grazie