Edge-lighting Rocky Ceiling Manuel d'utilisateur télécharger pdf

Installation Instructions for Rocky Ceiling MR16 Version

904-ROC-C-H1-04

Install the Fixture

ROC-C-H1-_

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

1: Loosen the M4 set screw (DO NOT REMOVE) on the metal

shade with the 2MM Allen wrench provided, and pull the

metal shade completely off of the canopy.

METAL SHADE

CANOPY

SAVE THESE INSTRUCTIONS!

- This product is ETL listed for indoor and outdoor locations.

- This product is for ceiling mount applications only.

- This product can mount to either a 4" square electrical box

with round plaster ring or an octagon electrical box.

- This product can be dimmed with a standard electronic

low voltage dimmer.

- This instruction shows a typical installation for indoor or

outdoor applications.

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never cover the halogen lamp with anything other than a

lamp shield provided by Edge Lighting and never place

flammable material close to the fixture.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

- Do not touch lamp at anytime. Use a soft cloth instead as oil

from skin may damage lamp.

- It is normal for a new halogen lamp to produce minor

smoke when first turned on.

- Turn power off and allow to cool before replacing lamp.

M4 SET SCREW

2MM ALLEN

WRENCH

2: Connect the white transformer wire to the neutral power

wire with a wire nut.

3: Connect the black transformer wire to the hot power wire

with a wire nut.

4: Place the transformer and wire nut connections inside the

electrical box.

TRANSFORMER

WIRE NUT

ELECTRICAL BOX

#8-32 SCREW

ELECTRICAL

BOX THREADED

HOLE

CROSSBAR

the provided #8-32 screws.

Feed the transformer wires through the crossbar center hole.

Mount the crossbar to the electrical box threaded holes with

1 2

Résumé du contenu

Page 1 - Rocky Ceiling MR16 Version

Installation Instructions for Rocky Ceiling MR16 Version904-ROC-C-H1-04Install the Fixture1ROC-C-H1-_1718 W. Fullerton AveChicago, IL 60614Tel: 773-77

Page 2 - Install the Lamp

D 9: Place all wires and wire connections inside the electrical box.10: Align the fixture canopy holes with the gasket and crossbar holes

Commentaires sur ces manuels

Pas de commentaire

Edge-lighting Rocky Ceiling Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Edge-lighting Rocky Ceiling. Edge Lighting Rocky Ceiling User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Edge-lighting Rocky Ceiling