Edge-lighting Cirrus Float End Feed Manuel d'utilisateur télécharger pdf

SAVE THESE INSTRUCTIONS!

- This product is suitable for indoor locations.

- This instruction shows a typical installation.

- Ensure that power to the junction box is OFF before

beginning any electrical work.

IMPORTANT INFORMATION

Installation Instructions for Cirrus Float End Feed

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

904-CF-D1-E-02

CF-D1-E-_

Install the Fixture

1: Measure the distance between the coaxial cable and the

aircraft cable mounted on the channel. This measurement

varies on the fixture length.

2: Mark the standoff location from the center of the electrical

box for the distant achieved on step 1.

CHANNEL

CANOPY

STANDOFF

ANCHOR

ANCHOR MUST

BE FLUSH TO CEILING

3: Tap the anchors onto the marked points up to the threaded

portion with a hammer.

4: Screw in the threaded portion of the anchors with a Phillips

screwdriver.

CEILING

STANDOFF

CANOPY

TOP VIEW

#8 SCREW

WASHER

W/THREADED

NIPPLE

STANDOFF

POST

WASHER

W/THREADED

NIPPLE

5: Feed the #8 screw through the washer w/threaded

nipple into the anchor.

6: Tighten the #8-32 screw completely into the anchor.

7: Tighten the standoff posts completely onto the threaded

nipple.

COAXIAL CABLE

AIRCRAFT CABLE

8: Push the tab on standoff and feed the aircraft cable from

the channel into a standoff, to hold the one end of the fixture

in place.

STANDOFF

POST TAB

AIRCRAFT

CABLE

1 2 3 4

Résumé du contenu

Page 1 - Cirrus Float End Feed

SAVE THESE INSTRUCTIONS!- This product is suitable for indoor locations.- This instruction shows a typical installation.- Ensure that power to the jun

Page 2

29: Feed the coaxial cable through the power feed canopy.CONNECTORASSEMBLYCOAXIALCONNECTORCOVER12COAXIALCONNECTORCOVER12: Unscrew the coaxial connecto

Page 3

18: Use the provided 1.5mm Allen wrench to replace and securely tighten the M3 set screw.19: Use the provided 2mm Allen wrench to securely tight

Page 4 - Height Adjustments

4WHITE (NEUTRAL)GENERAL WIRING DIAGRAMELECTRONIC LOW VOLTAGE DIMMERINPUT120VACBLACK (HOT)LED TRANSFORMERWHITE (NEUTRAL)BLACK (HOT)RED (24VAC)RED (24VA

Commentaires sur ces manuels

Pas de commentaire

Edge-lighting Cirrus Float End Feed Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Edge-lighting Cirrus Float End Feed. Edge Lighting Cirrus Float End Feed User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Edge-lighting Cirrus Float End Feed