Edge-lighting 2 Circuit Angle Joining Connectors Manuel d'utilisateur télécharger pdf

SAVE THESE INSTRUCTIONS!

M2C-LC-_

- This product is ETL listed for indoor dry locations.

- This product joins and electrically conducts two Monorail 2

Circuit sections end to end at 90° angle for ceiling

installation.

- The product is intended to be used with Edge Lighting

Monorail 2 Circuit systems only.

Installation Instructions for

Connector

Monorail 2 Circuit Ceiling "L" Conductive

904-M2C-LC-02

IMPORTANT INFORMATION

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

Install the Monorail 2 Circuit Ceiling "L" Connector

1: Push the Monorail 2 Circuit ceiling "L" connector pins

completely into one Monorail 2 Circuit section. Make sure

this Monorail section is secured with the standoffs

(Refer to the instructions provided with the

standoffs).

2: Push the other Monorail section completely onto the

Monorail 2 Circuit ceiling "L" connector pins and

simultaneously connect the Monorail 2 Circuit to the

standoffs.

ONE MONORAIL 2

CIRCUIT SECTION

MONORAIL 2 CIRCUIT

"L" CONNECTOR

THE OTHER

MONORAIL

2 CIRCUIT

SECTION

SAVE THESE INSTRUCTIONS!M2C-LC-_- This product is ETL listed for indoor dry locations.- This product joins and electrically conducts two Monorail 2

Pas de commentaire

Edge-lighting 2 Circuit Angle Joining Connectors Manuel d'utilisateur